Audio-Technica AT-LP60XHP Stereo Turntable with Headphones - Gunmetal & Black
Audio-Technica AT-LP60XHP Stereo Turntable with Headphones - Gunmetal & Black
Out Of Stock
Of course, the turntable can also be connected to your stereo, powered speakers, computer or other components and used as a standard turntable. The detachable RCA output cable (3.5 mm male to dual RCA male) and built-in switchable phono preamp allow the turntable be connected to components with and without a dedicated phono input. Like the AT-LP60X, the AT-LP60XHP features a redesigned tonearm base and headshell to improve tracking and reduce resonance. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis where its impact on the signal chain is limited.
Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the AT-LP60XBT’s Dual Magnet™ cartridge with replaceable stylus. The cartridge is integrated into the headshell for assured performance and ease of setup.
The turntable comes with a 45 RPM adapter and a removable hinged dust cover.
- Experience the high-fidelity audio of vinyl
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
- Integrated headphone amplifier with front-panel 3.5 mm (1/8") headphone jack and volume control
- ATH-250AV over-ear headphones with 40 mm drivers, 3.5 m (11.5') cable and 3.5 mm (1/8") stereo mini-plug
- Anti-resonance, die-cast aluminum platter
- Redesigned tonearm base and headshell for improved tracking and reduced resonance
- Integral Dual Magnet phono cartridge with replaceable diamond stylus (ATN3600L)
- AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
- Built-in switchable phono pre-amplifier for phono- or line-level output
- Includes: ATH-250AV headphones, detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover
Model | AT-LP60XHP/TURNTABLE WITH HEADPHONES |
---|---|
Dimensions | 14.15"W x 14.7"D x 3.84"H |
Weight | 8.11 lbs. |
Finish | Gunmetal/Black |
Turntable | |
Type | Belt drive turntable, fully automatic |
Motor | DC servo-controlled |
Speeds | 33-1/3 RPM, 45 RPM |
Turntable Platter | Aluminum |
Wow and Flutter | Less than 0.25% (WTD) @ 3 kHz |
Signal-to-Noise Ratio | >50 dB (DIN-B) |
Output Level | Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec, Pre-amp “LINE” 150 mV nominal at 1 kHz, 5 cm/sec |
Phono Pre-Amp Gain | 36 dB nominal, RIAA equalized |
Power Supply Requirements | 100 to 240 V, 50/60 Hz, 0.6 A Max. |
Accessories Included | Dust cover, Felt mat, Platter (with drive belt), 45 RPM adapter, RCA audio cable (approx. 1.2 m (3.9')), AC adapter (approx. 1.5 m (4.9')) |
Headphones | |
Type | Closed-back Dynamic |
Driver Diameter | 40mm |
Frequency Response | 18 – 22,000 Hz |
Maximum Input Power | 500 mW |
Sensitivity | 102 dB/mW |
Impedance | 43 OHM |
Weight | 3.4 oz |
Cable | 3.5 m |
Connector | 3.5 mm (⅛") stereo mini-plug |
Manufacturer Warranties
- 1-Year Limited Warranty
Sign Up For Emails and SMS Texts
Be the first to know about new products, special offers, sales, deals, and so much more!